https://rangeroverp38.org Sun, 24 May 2026 16:11:51 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://rangeroverp38.org/universal-3-75mm-flexi-air-intake-induction-pipe-hose-fits-apexi-kn-hks-ramair/ https://rangeroverp38.org/universal-3-75mm-flexi-air-intake-induction-pipe-hose-fits-apexi-kn-hks-ramair/#comments Tue, 21 Jan 2020 03:32:02 +0000 http://rangeroverp38.org/universal-3-75mm-flexi-air-intake-induction-pipe-hose-fits-apexi-kn-hks-ramair/ Read more >]]>



UNIVERSAL 3 FLEXI AIR INTAKE EXTENDABLE INDUCTION PIPE HOSE. 3 / 75mm fitting. 1meter long fully extended. NOTE TO GERMAN BUYERS. This product does not have a TUV certification. Therefore this product must not be on the vehicle at TUV test time. The item “UNIVERSAL 3 75mm FLEXI AIR INTAKE INDUCTION PIPE HOSE fits APEXI K&N HKS RAMAIR” is in sale since Friday, December 4, 2015. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Air Intake & Induction\Performance Air Intake Systems”. The seller is “tarmac-eater-autoparts-uk” and is located in Walton. This item can be shipped worldwide.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply
• Colour: Silver / Black

]]> https://rangeroverp38.org/universal-3-75mm-flexi-air-intake-induction-pipe-hose-fits-apexi-kn-hks-ramair/feed/ 0 https://rangeroverp38.org/2000w-induction-heater-car-paintless-dent-repair-remover-hotbox-instrument-tool/ https://rangeroverp38.org/2000w-induction-heater-car-paintless-dent-repair-remover-hotbox-instrument-tool/#comments Sun, 20 Jan 2019 06:44:03 +0000 http://rangeroverp38.org/2000w-induction-heater-car-paintless-dent-repair-remover-hotbox-instrument-tool/ Read more >]]>













Install appropriate coil and place over or around ferrous metal. Ideal for loosening stubborn and seized fixings. Supplied with special dent induction block for panel expansion and induction pad for plastic trim/sticker removal. Induction element delivers high heat fast and effectively. Heating rate is less than 1 second, and heating speed can be adjusted and controlled. Metal workpiece can be heated. Making induction rings based on the shape of the workpiece. Heating efficiency up to 95%, save energy than other heating methods such as gas, oxygen, acetylene, coking coal, electric furnace, high frequency tube, etc. The surface of the workpiece is uniformly heated, and heating fast, which reduced the surface oxide layer and workpiece deformation process. Automatic setting function, can be operated by one person. Small size, light weight, small footprint, easy to move. No need to debug, easy to installation and operation. No noise, no pollution and no open fire. Input Voltage: 220 V. Frequency: 50/60 Hz 4. Input Current: 5-10A 5. Output Current: 2 A. Package Included: 1 x Induction Heater Kit 5 x Coil Note: 1. When body & repair head without cooling, please do not touch, to avoid burns. When repairing, repair head and body temperature will rise up rapidly, not operate for a long time (every 115 seconds after the operation with a wet towel and repeatedly wipe the damaged parts for cooling), to avoid high temperature damage paint. All items will be checked before packing. All items are new and of high quality. We will reply you within 24- 48 hours. We will do our best to provide the better servece. So please give us an opportunity! The item “2000W Induction Heater Car Paintless Dent Repair Remover HotBox Instrument Tool” is in sale since Thursday, August 2, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “goodserviceliu” and is located in CN. This item can be shipped to all countries in Europe, all countries in continental Asia, United States, Canada, Australia.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply

]]> https://rangeroverp38.org/2000w-induction-heater-car-paintless-dent-repair-remover-hotbox-instrument-tool/feed/ 0 https://rangeroverp38.org/220v-eu-plug-induction-ductor-magnetic-heater-bolt-remover-flameless-heat/ https://rangeroverp38.org/220v-eu-plug-induction-ductor-magnetic-heater-bolt-remover-flameless-heat/#comments Sun, 13 Jan 2019 05:10:16 +0000 http://rangeroverp38.org/220v-eu-plug-induction-ductor-magnetic-heater-bolt-remover-flameless-heat/ Read more >]]>













2.5m Black Car Front Bumper Spoiler Lip Kit Splitter Valance Chin Protector Kits. Universal Car Seat Seam Wedge Cup Drink Holder Seat Wedge Cup Holder Mount 1x. Chip & Crack Car Windshield Window Glass Scratches Professional DIY Repair Kits. 35.8 inch Black Guard Car SUV Body Bumper Protector Trim Cover Protective Strip. Car Interior Air Outlet Armrest Box Dashboard Dust Hairs Green Cleaning Gel Glue. 2PCS WHEEL ARCH GUARD TRIM / WHEEL ARCH PROTECTOR UNIVERSAL SOFT RUBBER BLACK. OBD2 ELM327 Bluetooth Car Auto Fault Diagnostic Scanner Toolno wifi, not fit iOS. 3.5mm Aux Stereo Wireless Mini Bluetooth Music Audio Stereo Adapter Receiver. Universal Car Fault Code Reader U480 Engine Scanner Diagnostic OBD2 OBDII ELM327. Universal Aluminum Manual Black Leather 5-Speed Gear Shift Knob Shifter Lever. Before using: Please be sure to read and understand all safety rules and instructions in this manual before operating the heating inductor. Pay particular attention to the safety rules. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. Keep a fire extinguisher or fire blanket alongside at all times when using the heating inductor. Ensure no ammable products are near the work area while using the heating inductor. Do not use the heating inductor within 150mm (6 inches) of any air bag component. The heat created by the heating inductor can ignite the air bag squib propellant causing it to explode without warning. Do not operate the heating inductor while under the inuence of drugs, alcohol or any medication. The heating inductor can heat these metallic objects very quickly and cause serious burns or even ignite clothing. Do not use an attachment if the insulation has been breached. They cannot be repaired, only replaced. Ensure the heating inductor is connected to a supply that is adequately earthed. Do not use the heating inductor in the rain, moisture or immersed in water. Exposing the hea ting inductor to water or other liquids can cause an electrical shock hazard. If you have a cardiac pacemaker or any other kind of electronic or metal surgical implant DO NOT operate this tool, and always stay at least 1 metre (three feet) away from anybody operating it. Although the magnetic fields emitted by the tool only travel a few inches, they pose a dangerous risk to the proper operation of all implanted medical electronic devices in the user and any bystanders. Do not operate the heating inductor while wearing any metallic items such as jewellery, (including ring, watches, chains, identification tags, body piercing) or belt buckles. Do not wear clothing that contains metallic rivets, waistband buttons, pocket buttons or zips when operating the heating inductor. Fumes and smoke from hot/burning adhesives are toxic. Wear an appropriate dual filter (dust and fume) mask. Always wear heat-resistant gloves when using the heating inductor as it heats metal very quickly. It can be easily burn your hands and fingers when trying to remove parts from hot metal surfaces. Do not touch the coil, rope coil or body pad when the heating inductor plugged into the outlet. Coils will be hot after use, please take great care when fitting/removing. Before plugging in the heating inductor, make sure that the outlet voltage supplied is compatible with the voltage marked on the label and within 10% of the stated voltage. An outlet voltage incompatible with that specified on the label can result in serious hazards and damage to the heating inductor. Ensure attachment is securely located. Coil and main are firmly tightened before use. Do not use the heating inductor for longer than the stated duty cycle: 5 minutes on followed by 5 minutes off. The main circuit board has an overheat protection device, however the attachments do not have overheat protection so should not be used for more than 5 minutes of continued use. Do not attempt to create more than 4 coils when using the exible soft coil, a minimum of 2 coils and a maximum 3 to 4 coils is the optimum number needed for best operation. Do not leave the coil plugged into the HBR mains when not in use. Do not attempt to repair the HBR by yourselves. To prolong your heating inductor, leaving an 10mm air gap between the coil and the work piece is recommended as the insulation of the coil will eventually burn through if held directly to hot material. Choose the appropriately sized coil to give the closest fit to the work piece. Insert both ends of the coil into the coil location socket and tighten the thumb screws securely. Activate the power switch to run the heating inductor for 1-3 minutes until enough heat has been applied to the work piece to break the rust/corrosion bond. Release the power switch to turn off the power. Do not use portable generators. Turn unit off and allow the unit and all attachments to cool for at least 20 minutes. Make sure the unit is turned off and unplugged. After cool enough, use a dry, clean, non-abrasive cloth or paper towel to remove grease, oil, and other dirt from the heating inductor and electrical lead before returning them to the storage case. Storage of unit while still hot may result in damage to equipment or pose a fire hazard. Flameless Lossless Heating system Green&Safety 2.1 minute Removal process/97%Lower power consumption by/1 cent removing 1 bolt only cost you 1 cent/1.9 Kg weight with 3. Adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage. Fastest 60 seconds to 500 degrees centigrade, rapid heating, easy to remove rusty screws with wrench. Do not damage the bolt and the material around the equipment. Easy to use, only 3 minutes to master. Equipped with two LED lights for narrow and dark space. More coils are available. Each line is suitable for the size of different types of bolts. 9 The size of two books. Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools. HBR Main1 Flexible Soft Coil1.1m 18mm coil(diameter of bore)1Length 20cm 22mm coil(diameter of bore)1Length 20cm 28mm coil(diameter of bore)1Length 20cm. Screw 2 Manual 1. If you need UK or Australia Plug please leave a message for uswe will send an universal plug for you as a gift. All items will be checked before packing. All items are new and of high quality. We will reply you within 24- 48 hours. We will do our best to provide the better servece. So please give us an opportunity! The item “220V EU Plug Induction Ductor Magnetic Heater Bolt Remover Flameless Heat” is in sale since Tuesday, September 11, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “goodserviceliu” and is located in CN. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply
• Placement on Vehicle: Front
• Voltage: 220V
• Warranty: YES

]]> https://rangeroverp38.org/220v-eu-plug-induction-ductor-magnetic-heater-bolt-remover-flameless-heat/feed/ 0 https://rangeroverp38.org/induction-ductor-magnetic-heater-bolt-remover-flameless-heat-220v/ https://rangeroverp38.org/induction-ductor-magnetic-heater-bolt-remover-flameless-heat-220v/#comments Sun, 16 Dec 2018 09:39:36 +0000 http://rangeroverp38.org/induction-ductor-magnetic-heater-bolt-remover-flameless-heat-220v/ Read more >]]>













2.5m Black Car Front Bumper Spoiler Lip Kit Splitter Valance Chin Protector Kits. Universal Car Seat Seam Wedge Cup Drink Holder Seat Wedge Cup Holder Mount 1x. Chip & Crack Car Windshield Window Glass Scratches Professional DIY Repair Kits. 35.8 inch Black Guard Car SUV Body Bumper Protector Trim Cover Protective Strip. Car Interior Air Outlet Armrest Box Dashboard Dust Hairs Green Cleaning Gel Glue. 2PCS WHEEL ARCH GUARD TRIM / WHEEL ARCH PROTECTOR UNIVERSAL SOFT RUBBER BLACK. OBD2 ELM327 Bluetooth Car Auto Fault Diagnostic Scanner Toolno wifi, not fit iOS. 3.5mm Aux Stereo Wireless Mini Bluetooth Music Audio Stereo Adapter Receiver. Universal Car Fault Code Reader U480 Engine Scanner Diagnostic OBD2 OBDII ELM327. Universal Aluminum Manual Black Leather 5-Speed Gear Shift Knob Shifter Lever. Before using: Please be sure to read and understand all safety rules and instructions in this manual before operating the heating inductor. Pay particular attention to the safety rules. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. Keep a fire extinguisher or fire blanket alongside at all times when using the heating inductor. Ensure no ammable products are near the work area while using the heating inductor. Do not use the heating inductor within 150mm (6 inches) of any air bag component. The heat created by the heating inductor can ignite the air bag squib propellant causing it to explode without warning. Do not operate the heating inductor while under the inuence of drugs, alcohol or any medication. The heating inductor can heat these metallic objects very quickly and cause serious burns or even ignite clothing. Do not use an attachment if the insulation has been breached. They cannot be repaired, only replaced. Ensure the heating inductor is connected to a supply that is adequately earthed. Do not use the heating inductor in the rain, moisture or immersed in water. Exposing the hea ting inductor to water or other liquids can cause an electrical shock hazard. If you have a cardiac pacemaker or any other kind of electronic or metal surgical implant DO NOT operate this tool, and always stay at least 1 metre (three feet) away from anybody operating it. Although the magnetic fields emitted by the tool only travel a few inches, they pose a dangerous risk to the proper operation of all implanted medical electronic devices in the user and any bystanders. Do not operate the heating inductor while wearing any metallic items such as jewellery, (including ring, watches, chains, identification tags, body piercing) or belt buckles. Do not wear clothing that contains metallic rivets, waistband buttons, pocket buttons or zips when operating the heating inductor. Fumes and smoke from hot/burning adhesives are toxic. Wear an appropriate dual filter (dust and fume) mask. Always wear heat-resistant gloves when using the heating inductor as it heats metal very quickly. It can be easily burn your hands and fingers when trying to remove parts from hot metal surfaces. Do not touch the coil, rope coil or body pad when the heating inductor plugged into the outlet. Coils will be hot after use, please take great care when fitting/removing. Before plugging in the heating inductor, make sure that the outlet voltage supplied is compatible with the voltage marked on the label and within 10% of the stated voltage. An outlet voltage incompatible with that specified on the label can result in serious hazards and damage to the heating inductor. Ensure attachment is securely located. Coil and main are firmly tightened before use. Do not use the heating inductor for longer than the stated duty cycle: 5 minutes on followed by 5 minutes off. The main circuit board has an overheat protection device, however the attachments do not have overheat protection so should not be used for more than 5 minutes of continued use. Do not attempt to create more than 4 coils when using the exible soft coil, a minimum of 2 coils and a maximum 3 to 4 coils is the optimum number needed for best operation. Do not leave the coil plugged into the HBR mains when not in use. Do not attempt to repair the HBR by yourselves. To prolong your heating inductor, leaving an 10mm air gap between the coil and the work piece is recommended as the insulation of the coil will eventually burn through if held directly to hot material. Choose the appropriately sized coil to give the closest fit to the work piece. Insert both ends of the coil into the coil location socket and tighten the thumb screws securely. Activate the power switch to run the heating inductor for 1-3 minutes until enough heat has been applied to the work piece to break the rust/corrosion bond. Release the power switch to turn off the power. Do not use portable generators. Turn unit off and allow the unit and all attachments to cool for at least 20 minutes. Make sure the unit is turned off and unplugged. After cool enough, use a dry, clean, non-abrasive cloth or paper towel to remove grease, oil, and other dirt from the heating inductor and electrical lead before returning them to the storage case. Storage of unit while still hot may result in damage to equipment or pose a fire hazard. Flameless Lossless Heating system Green&Safety 2.1 minute Removal process/97%Lower power consumption by/1 cent removing 1 bolt only cost you 1 cent/1.9 Kg weight with 3. Adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage. Fastest 60 seconds to 500 degrees centigrade, rapid heating, easy to remove rusty screws with wrench. Do not damage the bolt and the material around the equipment. Easy to use, only 3 minutes to master. Equipped with two LED lights for narrow and dark space. More coils are available. Each line is suitable for the size of different types of bolts. 9 The size of two books. Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools. HBR Main1 Flexible Soft Coil1.1m 18mm coil(diameter of bore)1Length 20cm 22mm coil(diameter of bore)1Length 20cm 28mm coil(diameter of bore)1Length 20cm. Screw 2 Manual 1. If you need UK or Australia Plug please leave a message for uswe will send an universal plug for you as a gift. All items will be checked before packing. All items are new and of high quality. We will reply you within 24- 48 hours. We will do our best to provide the better servece. So please give us an opportunity! The item “Induction Ductor Magnetic Heater Bolt Remover Flameless Heat 220V” is in sale since Tuesday, September 11, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “goodserviceliu” and is located in CN. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply
• Placement on Vehicle: Front
• Voltage: 220V
• Warranty: YES

]]> https://rangeroverp38.org/induction-ductor-magnetic-heater-bolt-remover-flameless-heat-220v/feed/ 0 https://rangeroverp38.org/universal-performance-cyclone-filter-induction-kit-un1607-land-rover/ https://rangeroverp38.org/universal-performance-cyclone-filter-induction-kit-un1607-land-rover/#comments Mon, 28 May 2018 07:11:59 +0000 http://rangeroverp38.org/universal-performance-cyclone-filter-induction-kit-un1607-land-rover/ Read more >]]>





1 x Cyclone Air Filter. 1 x Flexible Cold Air Feed Hose. 2 x Jubilee Clips. 1 x Spring Clip. 1 x Mounting Bracket. 4 x Silicone Adapters. 1 x Turbo Fan. This is a full induction kit using cyclone technology. Cyclonic air flow accelerates the rate of air intake into the engine increasing power. The original air box will need to be removed to fit this kit. We recommend that this product be professionally fitted. Please see the main image for measurements. You can use a credit / debit card to pay once you have been redirected. Excludes scottish highlands, ireland & northern ireland. All BT and AB postcodes, DD8-11, GY1-99, HS1-99, IV1-23, IV25-27, IV30-32, IV36, IV40-56, JE1-99, KA27-28, KW1-3, KW5-17, PA20-49, PA60-78, PH19-26, PH30-44, PH49-50, and ZE1-99. Customers then have an additional 14 calendar days to actually return it to Fastlane Styling. Customers must return an item /items in the same condition as it was received enclosing the relevant items from the following list, also in original condition. All packaging such as boxes, bags, and polystyrene. Accessories such as brackets and fixings. “Free gifts” or bonus items. All items included in a bundle. The item “UNIVERSAL PERFORMANCE CYCLONE FILTER INDUCTION KIT UN1607 Land Rover” is in sale since Wednesday, October 28, 2015. This item is in the category “Vehicle Parts & Accessories\Car Parts\Air Intake & Fuel Delivery\Air Filters”. The seller is “fls-uk” and is located in Romford. This item can be shipped to United Kingdom.

• Manufacturer Part Number: UN1607
• Brand: FLS
• Type: Induction Kit
• Colour: Black/Carbon
• Fitting: Universal
• Placement on Vehicle: Front
• Air Filter Type: K&N TYPE AIR FILTER

]]> https://rangeroverp38.org/universal-performance-cyclone-filter-induction-kit-un1607-land-rover/feed/ 0 https://rangeroverp38.org/220v-1100w-portable-car-induction-heater-machine-hot-box-dent-repair-restore-kit/ https://rangeroverp38.org/220v-1100w-portable-car-induction-heater-machine-hot-box-dent-repair-restore-kit/#comments Sun, 27 May 2018 19:09:07 +0000 http://rangeroverp38.org/220v-1100w-portable-car-induction-heater-machine-hot-box-dent-repair-restore-kit/ Read more >]]>












Universal 1100W Induction PDR Heater Machine Hot Box Car Removing Paintless Dent Repair Tool 220V. 1100W Induction PDR Heater Machine Car Removing Paintless Dent Repair Tool 220V. Rated Power 1100 W. Input Voltage:220 V. Rated Input Current: 6 A. Heater Size(LWH):26 x 17 x 20 cm. Simple, easy to use, low cost of learning. Large-screen display, precise control, real-time monitoring. High-precision control, quality assurance, operational safety. Two operating modes to adapt to different needs. 1 x Induction Heater. 1 x Power Cable 1 x Quick Connect Head With Cable. Do not use this device in patients with pacemakers and various metal prostheses. Before using the equipment, please wear a protective mask, protective gloves and overalls to prevent burns in operation. Do not wear any metal items such as watches, necklaces, keys, belt buckles, coins, zippers, etc. The equipment shall not be used in conductive dust, spray working area, chemical fuel working area, high temperature zone and high humidity area. When the device is powered on, no combustible material can be placed next to it. Before using the equipment, please have a fire extinguisher in case of improper operation. Do not have to install airbags in the vicinity of the use of this tool. If the device is connected to the power supply, it is necessary to guard the equipment. Unplug the AC power outlet when not in use. Equipment storage, the temperature should be maintained at 050. When the mobile device to avoid vibration. Important Warning In Operation. Repair the head in the repair of damaged body process, repair the head and body temperature will rise rapidly, in the equipment, body, repair head without cooling, please do not touch, so as not to burn. Repair head in the repair process, repair of head and body temperature will rise rapidly, single damaged parts do not for a long time operation (every 115 seconds after the operation with a wet towel repeatedly wipe the damaged parts of the cooling), high temperature paint to avoid hurting. Repair process, repair the head and body temperature will rise rapidly, the car experience a moment of weak softening, during the repair of the head do not have to press the action, so as not to soften the moment caused by the increase in depression. Can’t be used on white color cars. Manual measuring, please allow 1 2 cm error, thank you. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Please understand, thank you! All items will be checked before packing. All items are new and of high quality. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “220V 1100W Portable Car Induction Heater Machine Hot Box Dent Repair Restore Kit” is in sale since Friday, November 17, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “eurofeiyan66″ and is located in CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.

• Placement on Vehicle: Front
• Manufacturer Part Number: Does Not Apply
• Brand: Unbranded
• Rated Power: 1100 W
• Frequency: 50/60 Hz
• Heater Size(L*W*H): 26 x 17 x 20 cm
• Feature 1: Large-Screen Display,Precise Control
• Feature 2: Real-time Monitoring,Simple, Easy To Use
• Rated Input Current: 6A
• Color: As the picture shows
• Warranty: YES
• Input Voltage: 220V

]]> https://rangeroverp38.org/220v-1100w-portable-car-induction-heater-machine-hot-box-dent-repair-restore-kit/feed/ 0 https://rangeroverp38.org/1100w-induction-heater-machine-hot-box-car-removing-paintless-dent-repair-tool/ https://rangeroverp38.org/1100w-induction-heater-machine-hot-box-car-removing-paintless-dent-repair-tool/#comments Sat, 18 Nov 2017 00:14:39 +0000 http://rangeroverp38.org/1100w-induction-heater-machine-hot-box-car-removing-paintless-dent-repair-tool/ Read more >]]>













Universal 1100W Induction PDR Heater Machine Hot Box Car Removing Paintless Dent Repair Tool 220V. 1100W Induction PDR Heater Machine Car Removing Paintless Dent Repair Tool 220V. Rated Power 1100 W. Input Voltage:220 V. Rated Input Current: 6 A. Heater Size(LWH):26 x 17 x 20 cm. Simple, easy to use, low cost of learning. Large-screen display, precise control, real-time monitoring. High-precision control, quality assurance, operational safety. Two operating modes to adapt to different needs. 1 x Induction Heater. 1 x Power Cable 1 x Quick Connect Head With Cable. Do not use this device in patients with pacemakers and various metal prostheses. Before using the equipment, please wear a protective mask, protective gloves and overalls to prevent burns in operation. Do not wear any metal items such as watches, necklaces, keys, belt buckles, coins, zippers, etc. The equipment shall not be used in conductive dust, spray working area, chemical fuel working area, high temperature zone and high humidity area. When the device is powered on, no combustible material can be placed next to it. Before using the equipment, please have a fire extinguisher in case of improper operation. Do not have to install airbags in the vicinity of the use of this tool. If the device is connected to the power supply, it is necessary to guard the equipment. Unplug the AC power outlet when not in use. Equipment storage, the temperature should be maintained at 050. When the mobile device to avoid vibration. Important Warning In Operation. Repair the head in the repair of damaged body process, repair the head and body temperature will rise rapidly, in the equipment, body, repair head without cooling, please do not touch, so as not to burn. Repair head in the repair process, repair of head and body temperature will rise rapidly, single damaged parts do not for a long time operation (every 115 seconds after the operation with a wet towel repeatedly wipe the damaged parts of the cooling), high temperature paint to avoid hurting. Repair process, repair the head and body temperature will rise rapidly, the car experience a moment of weak softening, during the repair of the head do not have to press the action, so as not to soften the moment caused by the increase in depression. Can’t be used on white color cars. Manual measuring, please allow 1 2 cm error, thank you. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Please understand, thank you! All items will be checked before packing. All items are new and of high quality. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “1100W Induction Heater Machine Hot Box Car Removing Paintless Dent Repair Tool” is in sale since Thursday, November 09, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “tiantianseller” and is located in CN. This item can be shipped worldwide.

• Manufacturer Part Number: Does Not Apply
• Brand: Unbranded
• Placement on Vehicle: Front
• Classic Car Part: Yes
• Rated Power: 1100 W
• Input Voltage: 220 V
• Frequency: 50/60 Hz
• Heater Size: (L*W*H):26 x 17 x 20 cm

]]> https://rangeroverp38.org/1100w-induction-heater-machine-hot-box-car-removing-paintless-dent-repair-tool/feed/ 0 https://rangeroverp38.org/induction-pdr-heater-car-removing-paintless-dent-repair-tool-real-time-monitor/ https://rangeroverp38.org/induction-pdr-heater-car-removing-paintless-dent-repair-tool-real-time-monitor/#comments Fri, 17 Nov 2017 00:11:18 +0000 http://rangeroverp38.org/induction-pdr-heater-car-removing-paintless-dent-repair-tool-real-time-monitor/ Read more >]]>












Universal 1100W Induction PDR Heater Machine Hot Box Car Removing Paintless Dent Repair Tool 220V. 1100W Induction PDR Heater Machine Car Removing Paintless Dent Repair Tool 220V. Rated Power 1100 W. Input Voltage:220 V. Rated Input Current: 6 A. Heater Size(LWH):26 x 17 x 20 cm. Simple, easy to use, low cost of learning. Large-screen display, precise control, real-time monitoring. High-precision control, quality assurance, operational safety. Two operating modes to adapt to different needs. 1 x Induction Heater. 1 x Power Cable 1 x Quick Connect Head With Cable. Do not use this device in patients with pacemakers and various metal prostheses. Before using the equipment, please wear a protective mask, protective gloves and overalls to prevent burns in operation. Do not wear any metal items such as watches, necklaces, keys, belt buckles, coins, zippers, etc. The equipment shall not be used in conductive dust, spray working area, chemical fuel working area, high temperature zone and high humidity area. When the device is powered on, no combustible material can be placed next to it. Before using the equipment, please have a fire extinguisher in case of improper operation. Do not have to install airbags in the vicinity of the use of this tool. If the device is connected to the power supply, it is necessary to guard the equipment. Unplug the AC power outlet when not in use. Equipment storage, the temperature should be maintained at 050. When the mobile device to avoid vibration. Important Warning In Operation. Repair the head in the repair of damaged body process, repair the head and body temperature will rise rapidly, in the equipment, body, repair head without cooling, please do not touch, so as not to burn. Repair head in the repair process, repair of head and body temperature will rise rapidly, single damaged parts do not for a long time operation (every 115 seconds after the operation with a wet towel repeatedly wipe the damaged parts of the cooling), high temperature paint to avoid hurting. Repair process, repair the head and body temperature will rise rapidly, the car experience a moment of weak softening, during the repair of the head do not have to press the action, so as not to soften the moment caused by the increase in depression. Can’t be used on white color cars. Manual measuring, please allow 1 2 cm error, thank you. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Please understand, thank you! All items will be checked before packing. All items are new and of high quality. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “Induction PDR Heater Car Removing Paintless Dent Repair Tool Real-time Monitor” is in sale since Friday, November 10, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Other Interior Parts & Trim”. The seller is “goodserviceliu” and is located in CN. This item can be shipped worldwide.

• Placement on Vehicle: Front
• Manufacturer Part Number: Does Not Apply
• Brand: Unbranded
• Feature: High Quality
• Feature 2: Large-screen display, precise control, real-time monitoring.
• Feature 3: High-precision control, quality assurance, operational safety.

]]> https://rangeroverp38.org/induction-pdr-heater-car-removing-paintless-dent-repair-tool-real-time-monitor/feed/ 0