https://rangeroverp38.org Tue, 02 Jun 2026 04:35:47 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://rangeroverp38.org/707221-nissens-heat-exchanger-interior-heating-front-for-land-rover/ https://rangeroverp38.org/707221-nissens-heat-exchanger-interior-heating-front-for-land-rover/#comments Wed, 25 Feb 2026 19:31:44 +0000 https://rangeroverp38.org/707221-nissens-heat-exchanger-interior-heating-front-for-land-rover/ Read more >]]>











707221 NISSENS HEAT EXCHANGER, INTERIOR HEATING FRONT FOR LAND ROVER. Water Tank Material (radiator). If required we will suggest an alternative item. Keep in mind, that there’s only less than 25% of our inventory listed on e-bay. 2.0 Sd4 4×4. Fitting Position : Front, Vehicle Equipment : for vehicles without electr. 2.0 Si4 4×4. 2.0 Td4 4×4. 3.0 D 4×4. 3.0 SCV6 4×4. 3.0 SDV6 4×4. 3.0 Td6 4×4. Block Separation :, Fitting Position : Front, Vehicle Equipment : for vehicles without electr. Auxiliary heater, Vehicle Identification Number (VIN) to : L2426462, Vehicle Production Country : Great Britain, Vehicle Production Country : Slovakia. DISCOVERY V VAN (L462). 3.0 D300 MHEV 4×4. 3.0 Scv6 4×4. 3.0 Sdv6 4×4. RANGE ROVER IV (L405). 2.0 P400e Hybrid 4×4. 3.0 P400 MHEV 4×4. 3.0 SDV6 Hybrid 4×4. 3.0 TDV6 4×4. 4.4 SDV8 4×4. 5.0 SCV8 4×4. 5.0 V8 4×4. RANGE ROVER SPORT II (L494). 2.0 P400e PHEV 4×4. 2.0 SD4 4×4. 3.0 D250 4×4. 3.0 D250 MHEV 4×4. 3.0 D300 4×4. 3.0 D350 4×4. 3.0 D350 MHEV 4×4. 3.0 P360 MHEV 4×4. Vehicle Equipment : for vehicles without electr.

]]> https://rangeroverp38.org/707221-nissens-heat-exchanger-interior-heating-front-for-land-rover/feed/ 0 https://rangeroverp38.org/my-abandoned-range-rover-p38-has-a-big-problem-with-heat/ https://rangeroverp38.org/my-abandoned-range-rover-p38-has-a-big-problem-with-heat/#comments Sun, 14 Aug 2022 02:37:42 +0000 https://rangeroverp38.org/my-abandoned-range-rover-p38-has-a-big-problem-with-heat/ ]]> https://rangeroverp38.org/my-abandoned-range-rover-p38-has-a-big-problem-with-heat/feed/ 0 https://rangeroverp38.org/car-engine-bonnet-acoustic-insulation-deadening-heat-shield-floor-mat-10mm-1x1-4/ https://rangeroverp38.org/car-engine-bonnet-acoustic-insulation-deadening-heat-shield-floor-mat-10mm-1x1-4/#comments Sun, 01 Dec 2019 16:42:02 +0000 http://rangeroverp38.org/car-engine-bonnet-acoustic-insulation-deadening-heat-shield-floor-mat-10mm-1x1-4/ Read more >]]>










10MM automotive firewall soundproofing Mat PE self-adhesive thermal insulation foam 1×1.4m. Description: 100% Brand New Meterial:PE with aluminum and self-adhesive Covered with Alumium Shield Thickness: 10mm 1. High quality tri-layer, twin density lightweight foam laminate 2. High noise reduction & thermal insulation properties 3. High temperature resistance 4. High thermal & acoustic properties 5. Durable outer cover material for tough environments 6. Easy to cut & fit, strong adhesive backing 7. Non-flammable, flame retardant Installation: 1, Remove the door panels 2, Install the screws back in original place, it will easy be found when you mount, avoiding holes be covered 3, With roller tools will make insulation materials and sheet metal firm fit, and play best adhesive, damping performance 4, According to the effect you want choose construction program, only single Soundproof/Damping Plate or single Heat & Noise Insulation Cotton or Both them. 5, You can also use on car roof floors, hood , firewall, chassis, trunk room, trunk lid and so on.. Do not cover the chassis wiring or air holes. Applications: Exterior bulkhead, firewall, hood, engine compartment, engine bays. Boot, wheel arch, body panels, load floor, under seat, floor, interior bulkhead. Also ideal for under floor applications as it has great load resistance properties. Package Included: one roll (11.4m, Thickness: 10mm). We will reply you within 24- 48 hours. All items will be checked before packing. All items are new and of high quality. Welcome to our Store. The item “Car Engine Bonnet Acoustic Insulation Deadening Heat Shield Floor Mat 10mm 1X1.4″ is in sale since Saturday, May 19, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Carpets & Floor Mats”. The seller is “best-aladdin2017″ and is located in CN. This item can be shipped worldwide.

• Thickness: 10mm
• Size: 1*1.4m
• Feature 1: High noise reduction & thermal insulation properties
• Feature 2: High temperature resistance
• Material: PE with aluminum and self-adhesive
• Manufacturer Part Number: Does Not Apply
• Reference OE/OEM Number: Does Not Apply
• Placement on Vehicle: Front
• Other Part Number: Does Not Apply
• Brand: Unbranded

]]> https://rangeroverp38.org/car-engine-bonnet-acoustic-insulation-deadening-heat-shield-floor-mat-10mm-1x1-4/feed/ 0 https://rangeroverp38.org/6-ports-double-side-iron-compact-heater-heat-fan-switch-set-for-auto-car-vehicle/ https://rangeroverp38.org/6-ports-double-side-iron-compact-heater-heat-fan-switch-set-for-auto-car-vehicle/#comments Fri, 03 May 2019 22:58:20 +0000 http://rangeroverp38.org/6-ports-double-side-iron-compact-heater-heat-fan-switch-set-for-auto-car-vehicle/ Read more >]]>













12V 6 Ports Universal Double Side Iron Compact Heater Heat Fan w/ Speed Switch Set. Specification: Voltage: 12V Material: Copper, Iron Dimensions: length – 22cm/8.7” body only Width – 16.5cm/6.5″ body only Height – 8cm/3.1″ Fitting required – 5/8” (16mm) inner diameter water hose (not included) Package Included: 2pcs x mounting brackets 1pcs x switch 2pcs x Tee and 2pcs straight fittings 8pcs x 16-25cm hose clamps 1pcs x heater Features: Fitting required – 5/8” (16mm) inner diameter water hose (not included). Very easy to install , only need to hook this heater up to water tank and supply power , then works! Apply this to your own custom duct work. Temperature of heating depends on your vehicle water temperature. The red wire connect to the cathode of power supply and motor. The Blue wire connect to the anode of motor. The black connect to the anode of power supply. Please allow 1-3mm error due to manual measurement. The color may have different as the difference display, pls understand. All items will be checked before packing. All items are new and of high quality. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “6 Ports Double Side Iron Compact Heater Heat Fan Switch Set for Auto Car Vehicle” is in sale since Tuesday, October 24, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Air Conditioning & Heating\Blowers & Fans”. The seller is “goodserviceliu” and is located in CN. This item can be shipped worldwide.

• Manufacturer Part Number: Does Not Apply
• Brand: Unbranded
• Material: Copper, Iron
• Feature: High Quality,Durable

]]> https://rangeroverp38.org/6-ports-double-side-iron-compact-heater-heat-fan-switch-set-for-auto-car-vehicle/feed/ 0 https://rangeroverp38.org/220v-eu-plug-induction-ductor-magnetic-heater-bolt-remover-flameless-heat/ https://rangeroverp38.org/220v-eu-plug-induction-ductor-magnetic-heater-bolt-remover-flameless-heat/#comments Sun, 13 Jan 2019 05:10:16 +0000 http://rangeroverp38.org/220v-eu-plug-induction-ductor-magnetic-heater-bolt-remover-flameless-heat/ Read more >]]>













2.5m Black Car Front Bumper Spoiler Lip Kit Splitter Valance Chin Protector Kits. Universal Car Seat Seam Wedge Cup Drink Holder Seat Wedge Cup Holder Mount 1x. Chip & Crack Car Windshield Window Glass Scratches Professional DIY Repair Kits. 35.8 inch Black Guard Car SUV Body Bumper Protector Trim Cover Protective Strip. Car Interior Air Outlet Armrest Box Dashboard Dust Hairs Green Cleaning Gel Glue. 2PCS WHEEL ARCH GUARD TRIM / WHEEL ARCH PROTECTOR UNIVERSAL SOFT RUBBER BLACK. OBD2 ELM327 Bluetooth Car Auto Fault Diagnostic Scanner Toolno wifi, not fit iOS. 3.5mm Aux Stereo Wireless Mini Bluetooth Music Audio Stereo Adapter Receiver. Universal Car Fault Code Reader U480 Engine Scanner Diagnostic OBD2 OBDII ELM327. Universal Aluminum Manual Black Leather 5-Speed Gear Shift Knob Shifter Lever. Before using: Please be sure to read and understand all safety rules and instructions in this manual before operating the heating inductor. Pay particular attention to the safety rules. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. Keep a fire extinguisher or fire blanket alongside at all times when using the heating inductor. Ensure no ammable products are near the work area while using the heating inductor. Do not use the heating inductor within 150mm (6 inches) of any air bag component. The heat created by the heating inductor can ignite the air bag squib propellant causing it to explode without warning. Do not operate the heating inductor while under the inuence of drugs, alcohol or any medication. The heating inductor can heat these metallic objects very quickly and cause serious burns or even ignite clothing. Do not use an attachment if the insulation has been breached. They cannot be repaired, only replaced. Ensure the heating inductor is connected to a supply that is adequately earthed. Do not use the heating inductor in the rain, moisture or immersed in water. Exposing the hea ting inductor to water or other liquids can cause an electrical shock hazard. If you have a cardiac pacemaker or any other kind of electronic or metal surgical implant DO NOT operate this tool, and always stay at least 1 metre (three feet) away from anybody operating it. Although the magnetic fields emitted by the tool only travel a few inches, they pose a dangerous risk to the proper operation of all implanted medical electronic devices in the user and any bystanders. Do not operate the heating inductor while wearing any metallic items such as jewellery, (including ring, watches, chains, identification tags, body piercing) or belt buckles. Do not wear clothing that contains metallic rivets, waistband buttons, pocket buttons or zips when operating the heating inductor. Fumes and smoke from hot/burning adhesives are toxic. Wear an appropriate dual filter (dust and fume) mask. Always wear heat-resistant gloves when using the heating inductor as it heats metal very quickly. It can be easily burn your hands and fingers when trying to remove parts from hot metal surfaces. Do not touch the coil, rope coil or body pad when the heating inductor plugged into the outlet. Coils will be hot after use, please take great care when fitting/removing. Before plugging in the heating inductor, make sure that the outlet voltage supplied is compatible with the voltage marked on the label and within 10% of the stated voltage. An outlet voltage incompatible with that specified on the label can result in serious hazards and damage to the heating inductor. Ensure attachment is securely located. Coil and main are firmly tightened before use. Do not use the heating inductor for longer than the stated duty cycle: 5 minutes on followed by 5 minutes off. The main circuit board has an overheat protection device, however the attachments do not have overheat protection so should not be used for more than 5 minutes of continued use. Do not attempt to create more than 4 coils when using the exible soft coil, a minimum of 2 coils and a maximum 3 to 4 coils is the optimum number needed for best operation. Do not leave the coil plugged into the HBR mains when not in use. Do not attempt to repair the HBR by yourselves. To prolong your heating inductor, leaving an 10mm air gap between the coil and the work piece is recommended as the insulation of the coil will eventually burn through if held directly to hot material. Choose the appropriately sized coil to give the closest fit to the work piece. Insert both ends of the coil into the coil location socket and tighten the thumb screws securely. Activate the power switch to run the heating inductor for 1-3 minutes until enough heat has been applied to the work piece to break the rust/corrosion bond. Release the power switch to turn off the power. Do not use portable generators. Turn unit off and allow the unit and all attachments to cool for at least 20 minutes. Make sure the unit is turned off and unplugged. After cool enough, use a dry, clean, non-abrasive cloth or paper towel to remove grease, oil, and other dirt from the heating inductor and electrical lead before returning them to the storage case. Storage of unit while still hot may result in damage to equipment or pose a fire hazard. Flameless Lossless Heating system Green&Safety 2.1 minute Removal process/97%Lower power consumption by/1 cent removing 1 bolt only cost you 1 cent/1.9 Kg weight with 3. Adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage. Fastest 60 seconds to 500 degrees centigrade, rapid heating, easy to remove rusty screws with wrench. Do not damage the bolt and the material around the equipment. Easy to use, only 3 minutes to master. Equipped with two LED lights for narrow and dark space. More coils are available. Each line is suitable for the size of different types of bolts. 9 The size of two books. Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools. HBR Main1 Flexible Soft Coil1.1m 18mm coil(diameter of bore)1Length 20cm 22mm coil(diameter of bore)1Length 20cm 28mm coil(diameter of bore)1Length 20cm. Screw 2 Manual 1. If you need UK or Australia Plug please leave a message for uswe will send an universal plug for you as a gift. All items will be checked before packing. All items are new and of high quality. We will reply you within 24- 48 hours. We will do our best to provide the better servece. So please give us an opportunity! The item “220V EU Plug Induction Ductor Magnetic Heater Bolt Remover Flameless Heat” is in sale since Tuesday, September 11, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “goodserviceliu” and is located in CN. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply
• Placement on Vehicle: Front
• Voltage: 220V
• Warranty: YES

]]> https://rangeroverp38.org/220v-eu-plug-induction-ductor-magnetic-heater-bolt-remover-flameless-heat/feed/ 0 https://rangeroverp38.org/induction-ductor-magnetic-heater-bolt-remover-flameless-heat-220v/ https://rangeroverp38.org/induction-ductor-magnetic-heater-bolt-remover-flameless-heat-220v/#comments Sun, 16 Dec 2018 09:39:36 +0000 http://rangeroverp38.org/induction-ductor-magnetic-heater-bolt-remover-flameless-heat-220v/ Read more >]]>













2.5m Black Car Front Bumper Spoiler Lip Kit Splitter Valance Chin Protector Kits. Universal Car Seat Seam Wedge Cup Drink Holder Seat Wedge Cup Holder Mount 1x. Chip & Crack Car Windshield Window Glass Scratches Professional DIY Repair Kits. 35.8 inch Black Guard Car SUV Body Bumper Protector Trim Cover Protective Strip. Car Interior Air Outlet Armrest Box Dashboard Dust Hairs Green Cleaning Gel Glue. 2PCS WHEEL ARCH GUARD TRIM / WHEEL ARCH PROTECTOR UNIVERSAL SOFT RUBBER BLACK. OBD2 ELM327 Bluetooth Car Auto Fault Diagnostic Scanner Toolno wifi, not fit iOS. 3.5mm Aux Stereo Wireless Mini Bluetooth Music Audio Stereo Adapter Receiver. Universal Car Fault Code Reader U480 Engine Scanner Diagnostic OBD2 OBDII ELM327. Universal Aluminum Manual Black Leather 5-Speed Gear Shift Knob Shifter Lever. Before using: Please be sure to read and understand all safety rules and instructions in this manual before operating the heating inductor. Pay particular attention to the safety rules. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. Keep a fire extinguisher or fire blanket alongside at all times when using the heating inductor. Ensure no ammable products are near the work area while using the heating inductor. Do not use the heating inductor within 150mm (6 inches) of any air bag component. The heat created by the heating inductor can ignite the air bag squib propellant causing it to explode without warning. Do not operate the heating inductor while under the inuence of drugs, alcohol or any medication. The heating inductor can heat these metallic objects very quickly and cause serious burns or even ignite clothing. Do not use an attachment if the insulation has been breached. They cannot be repaired, only replaced. Ensure the heating inductor is connected to a supply that is adequately earthed. Do not use the heating inductor in the rain, moisture or immersed in water. Exposing the hea ting inductor to water or other liquids can cause an electrical shock hazard. If you have a cardiac pacemaker or any other kind of electronic or metal surgical implant DO NOT operate this tool, and always stay at least 1 metre (three feet) away from anybody operating it. Although the magnetic fields emitted by the tool only travel a few inches, they pose a dangerous risk to the proper operation of all implanted medical electronic devices in the user and any bystanders. Do not operate the heating inductor while wearing any metallic items such as jewellery, (including ring, watches, chains, identification tags, body piercing) or belt buckles. Do not wear clothing that contains metallic rivets, waistband buttons, pocket buttons or zips when operating the heating inductor. Fumes and smoke from hot/burning adhesives are toxic. Wear an appropriate dual filter (dust and fume) mask. Always wear heat-resistant gloves when using the heating inductor as it heats metal very quickly. It can be easily burn your hands and fingers when trying to remove parts from hot metal surfaces. Do not touch the coil, rope coil or body pad when the heating inductor plugged into the outlet. Coils will be hot after use, please take great care when fitting/removing. Before plugging in the heating inductor, make sure that the outlet voltage supplied is compatible with the voltage marked on the label and within 10% of the stated voltage. An outlet voltage incompatible with that specified on the label can result in serious hazards and damage to the heating inductor. Ensure attachment is securely located. Coil and main are firmly tightened before use. Do not use the heating inductor for longer than the stated duty cycle: 5 minutes on followed by 5 minutes off. The main circuit board has an overheat protection device, however the attachments do not have overheat protection so should not be used for more than 5 minutes of continued use. Do not attempt to create more than 4 coils when using the exible soft coil, a minimum of 2 coils and a maximum 3 to 4 coils is the optimum number needed for best operation. Do not leave the coil plugged into the HBR mains when not in use. Do not attempt to repair the HBR by yourselves. To prolong your heating inductor, leaving an 10mm air gap between the coil and the work piece is recommended as the insulation of the coil will eventually burn through if held directly to hot material. Choose the appropriately sized coil to give the closest fit to the work piece. Insert both ends of the coil into the coil location socket and tighten the thumb screws securely. Activate the power switch to run the heating inductor for 1-3 minutes until enough heat has been applied to the work piece to break the rust/corrosion bond. Release the power switch to turn off the power. Do not use portable generators. Turn unit off and allow the unit and all attachments to cool for at least 20 minutes. Make sure the unit is turned off and unplugged. After cool enough, use a dry, clean, non-abrasive cloth or paper towel to remove grease, oil, and other dirt from the heating inductor and electrical lead before returning them to the storage case. Storage of unit while still hot may result in damage to equipment or pose a fire hazard. Flameless Lossless Heating system Green&Safety 2.1 minute Removal process/97%Lower power consumption by/1 cent removing 1 bolt only cost you 1 cent/1.9 Kg weight with 3. Adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage. Fastest 60 seconds to 500 degrees centigrade, rapid heating, easy to remove rusty screws with wrench. Do not damage the bolt and the material around the equipment. Easy to use, only 3 minutes to master. Equipped with two LED lights for narrow and dark space. More coils are available. Each line is suitable for the size of different types of bolts. 9 The size of two books. Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools. HBR Main1 Flexible Soft Coil1.1m 18mm coil(diameter of bore)1Length 20cm 22mm coil(diameter of bore)1Length 20cm 28mm coil(diameter of bore)1Length 20cm. Screw 2 Manual 1. If you need UK or Australia Plug please leave a message for uswe will send an universal plug for you as a gift. All items will be checked before packing. All items are new and of high quality. We will reply you within 24- 48 hours. We will do our best to provide the better servece. So please give us an opportunity! The item “Induction Ductor Magnetic Heater Bolt Remover Flameless Heat 220V” is in sale since Tuesday, September 11, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “goodserviceliu” and is located in CN. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply
• Placement on Vehicle: Front
• Voltage: 220V
• Warranty: YES

]]> https://rangeroverp38.org/induction-ductor-magnetic-heater-bolt-remover-flameless-heat-220v/feed/ 0 https://rangeroverp38.org/6ports-heater-marine-boat-cab-van-camper-heat-fan-with-speed-switch-set/ https://rangeroverp38.org/6ports-heater-marine-boat-cab-van-camper-heat-fan-with-speed-switch-set/#comments Sun, 25 Nov 2018 19:27:06 +0000 http://rangeroverp38.org/6ports-heater-marine-boat-cab-van-camper-heat-fan-with-speed-switch-set/ Read more >]]>








12V 6 Ports Universal Double Side Iron Compact Heater Heat Fan w/ Speed Switch Set. Specification: Voltage: 12V Material: Copper, Iron Dimensions: length – 22cm/8.7” body only Width – 16.5cm/6.5″ body only Height – 8cm/3.1″. Fitting required – 5/8” (16mm) inner diameter water hose (not included) Package Included: 2pcs x mounting brackets 1pcs x switch 2pcs x Tee and 2pcs straight fittings 8pcs x 16-25cm hose clamps 1pcs x heater Features: Fitting required – 5/8” (16mm) inner diameter water hose (not included). Very easy to install , only need to hook this heater up to water tank and supply power , then works! Apply this to your own custom duct work. Temperature of heating depends on your vehicle water temperature. The red wire connect to the cathode of power supply and motor. The Blue wire connect to the anode of motor. The black connect to the anode of power supply. Please allow 1-3mm error due to manual measurement. The color may have different as the difference display, pls understand. All items will be checked before packing. All items are new and of high quality. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “6Ports Heater Marine, Boat, Cab, Van, Camper Heat Fan with Speed Switch Set” is in sale since Tuesday, October 24, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Air Conditioning & Heating\Heater Parts”. The seller is “tiantianseller” and is located in CN. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.

• Brand: Unbranded/Generic
• Manufacturer Part Number: Does Not Apply
• Type: Heater
• Voltage: 12V
• Material: Copper, Iron
• length: 22cm/8.7”
• Width: 16.5cm/6.5″
• Height: 8cm/3.1″
• Fitting required: 5/8” (16mm) inner diameter water hose (not included)

]]> https://rangeroverp38.org/6ports-heater-marine-boat-cab-van-camper-heat-fan-with-speed-switch-set/feed/ 0 https://rangeroverp38.org/1-pair-car-polyurethane-body-wheel-eyebrow-fender-flares-decor-heat-resistant/ https://rangeroverp38.org/1-pair-car-polyurethane-body-wheel-eyebrow-fender-flares-decor-heat-resistant/#comments Sat, 07 Jul 2018 10:20:50 +0000 http://rangeroverp38.org/1-pair-car-polyurethane-body-wheel-eyebrow-fender-flares-decor-heat-resistant/ Read more >]]>













2x Car Polyurethane Body Wheel Eyebrow Fender Flares Flexible Durable Black. 100% – BRAND NEW Color: Black Material: Polyurethane Fitment – Fender Flares Durable Material- Fender Flares constructed with lightweight, tough, durable, and impact resistant material. Heat and cold resistant. 100% UV-protected to prevent fading and cracking. Black Smooth Finish – Easily Re-Paintable to Match Your Finishes Look. Package Includes: 2pcs Car fender flare. NOTE:Please make sure to measure vehicle’s fenders before purchasing. Installation Instructions Not Included. All items will be checked before packing. All items are new and of high quality. All sales are final. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “1 Pair Car Polyurethane Body Wheel Eyebrow Fender Flares Decor Heat Resistant” is in sale since Friday, September 8, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Other Interior Parts & Trim”. The seller is “goodserviceliu” and is located in CN. This item can be shipped worldwide.

• Manufacturer Part Number: Does Not Apply
• Brand: Unbranded
• Placement on Vehicle: Front
• Feature: Durable,High Quality
• Material: Polyurethane

]]> https://rangeroverp38.org/1-pair-car-polyurethane-body-wheel-eyebrow-fender-flares-decor-heat-resistant/feed/ 0