https://rangeroverp38.org Sun, 26 Apr 2026 00:04:47 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://rangeroverp38.org/land-range-rover-sd1-v8-mocal-rfk2-34unf-remote-oil-filter-kit-side-exit-xu/ https://rangeroverp38.org/land-range-rover-sd1-v8-mocal-rfk2-34unf-remote-oil-filter-kit-side-exit-xu/#comments Thu, 07 Jun 2018 08:13:42 +0000 http://rangeroverp38.org/land-range-rover-sd1-v8-mocal-rfk2-34unf-remote-oil-filter-kit-side-exit-xu/ Read more >]]>


GENUINE MOCAL LAND ROVER V8 CONVERSION REMOTE OIL FILTER KIT. Most Rover V8 engines when fitted in a Land Rover. UNIVERSAL REMOTE FILTER KITS, OIL COOLERS / FITTING KITS & THE FULL MOCAL RANGE AVAILABLE – PLEASE SEE OUR SHOP ITEMS. This is a brand new MOCAL remote oil filter kit, designed for Land Rover V8 conversions – engines with 3/4unf oil filter threads. Ideal for hard to reach or inaccessible oil filters, engine transplants / conversions etc. 3/4unf side exit take off plate (60mm high). Take off plate seals. Remote filter head (with mounting bracket). 2x 1/2 ID high temperature/pressure oil hose. 4x 1/2bsp take off plate/filter head fittings. Instruction sheet (filter head). Hoses supplied are fixed length & approx 24 long (each). PLEASE CHECK WHICH TYPE OF TAKE OFF PLATE IS REQUIRED FOR YOUR APPLICATION. Designed for Motorsport use. No instillation instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “LAND / RANGE ROVER SD1 V8 MOCAL RFK2 3/4UNF REMOTE OIL FILTER KIT SIDE EXIT XU” is in sale since Thursday, August 3, 2017. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “mattyzx” and is located in Dorking,Surrey. This item can be shipped worldwide.

• Manufacturer Part Number: RKF2
• Brand: Mocal
• Other Part Number: MLR.XU
• Country/Region of Manufacture: United Kingdom
• Part Manufacturer: Mocal
• Part Manufacturer Number: RFK2
• Manufacturer: ROVER

]]> https://rangeroverp38.org/land-range-rover-sd1-v8-mocal-rfk2-34unf-remote-oil-filter-kit-side-exit-xu/feed/ 0 https://rangeroverp38.org/custom-built-range-rover-stainless-steel-dual-exit-cat-back-exhaust/ https://rangeroverp38.org/custom-built-range-rover-stainless-steel-dual-exit-cat-back-exhaust/#comments Wed, 05 Jul 2017 04:07:07 +0000 http://rangeroverp38.org/custom-built-range-rover-stainless-steel-dual-exit-cat-back-exhaust/ Read more >]]>


01922 645646 (EXT 4). Brackets – Hangers – Mounts. Induction Kits / Ducting. Radiator Caps / Valves. Stainless Tube & Pipe. Tailpipes / Trims / Tips. Turbo- Kits / Accessories. Dual Exit Cat Back System. We are offering you a MIJ stainless steel cat-back exhaust system comprising of the middle & rearsection. And we require your. Vehicle on our premises. The complete fabrication & fitting of this stainless steel exhaust system will take. From when you arrive. Other styles for tailpipes are available instore, e. Round, oval, square, twin tailpipes. This is a custom built exhaust system, made in 304 stainless steel. Free-flowing design that increases performance and efficiency. E fabricate OEM patterned stainless steel exhaust systems. You can choose from a choice of sounds – quiet, mid-sport or full sport. Mid-sport is our most popular setup as it gives you a sporty tone when applying the throttle, but nothing that’s intrusive. You can also have a choice of tailpipes – please note there may be an additional charge for depending on the tailpipes chosen. And it comes with a lifetime guarantee so you don’t have to worry about your exhaust. Our most popular choice for sound is a midsport setup, this gives the best of both worlds; a non intrusive yet sporty note. As this is a custom built system we would require your vehicle on our premises in order to fabricate and fit the system. Unfortunately we cannot send this item out in the post. We work together with you using our simple & effective steps. Your vehicle is driven onto the ramp & your current exhaust system is removed. Discussion & walk through of the exhaust setup & selection of tips to suit the rear. Complete fabrication of the exhaust system to the discussed spec (approx 2.5 hrs). A walk through with you of the new exhaust setup & photos for web also taken. Finally your complete satisfaction, paperwork completion & your ready to go.. While we’re working on your system feel free to relax in our comfortable lounge, have refreshments and watch TV, or take a look around the town centre approx. We have modern, purpose built premises in the Midlands. Here’s the science bit.. All our custom exhausts are free-flowing, that means there are minimal restrictions within our exhaust silencers. Will have restrictions within the exhaust boxes, known as baffles & chambers. One of the aims of this type of exhaust box is to reduce the sound level with intersections & sound absorption material. However this gives a negative effect on the travelling direction speed of the gases, causing them to slow down & delay the process. With our free-flowing system the gases flow easily as there’s nothing to hinder them, giving you the performance gains. Our exhaust system is built & setup accordingly to suit your car model, various research & development techniques have been put into place by us to give your car the best exhaust setup. With consideration to engine capacity & engine modifications we come up with an exhaust system for your car to suit & perform perfectly. Performance gains are noticeable with all our sports exhausts. We advise & share our experience to give you a superb exhaust system with all the added benefits.. We also specialise in catalytic converters (standard & hi-flow sports cats), decats (cat bypass), downpipes, flexi pipes, middle sections, rear sections (backboxes) & all other exhaust parts. To view our wide range of quality products. Any queries, questions or need for further advice & support? Excludes Scottish Highlands, Islands and Northern Ireland. Due to there being’dangerous goods’ within the kit (aerosol), we can currently dispatch these its to the UK, Belgium, The Netherlands, Vatican City, Luxembourg, Monaco, France (mainland only), Germany, Austria, Spain (mainland only), Portugal (mainland only), Italy (mainland only), Poland, Hungary, Czech Republic and Denmark (zip code 50-99). The item “Custom Built Range Rover Stainless Steel Dual Exit Cat-Back Exhaust” is in sale since Wednesday, August 06, 2008. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “mijexhaust” and is located in Walsall. This item can’t be shipped, the buyer must pick up the item.

• Type: Exhaust
• Subtype: Complete Exhaust Systems
• Model/ Series: Range Rover
• Manufacturer: Land Rover
• Intended Use: Replacement Part
• Manufacturer Part Number: mij
• Brand: mij

]]> https://rangeroverp38.org/custom-built-range-rover-stainless-steel-dual-exit-cat-back-exhaust/feed/ 0