https://rangeroverp38.org Sun, 12 Jul 2026 18:48:33 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://rangeroverp38.org/1008ft-car-front-bumper-lip-splitter-valance-chin-skirt-body-protector-trim/ https://rangeroverp38.org/1008ft-car-front-bumper-lip-splitter-valance-chin-skirt-body-protector-trim/#comments Thu, 18 Jun 2020 20:00:31 +0000 http://rangeroverp38.org/1008ft-car-front-bumper-lip-splitter-valance-chin-skirt-body-protector-trim/ Read more >]]>













To reduce the reversing flow when car driving. At the same time increase the down force of the car to make the car more stable for reducing fuel consumption. Material: Quality Rubber Foam. Length: Approx 2.5 Meter / 100″ Width: Approx 6.5CM / 2.5″. Universal fits for most cars/trucks/SUVS Stick it on front or rear bumper, body kit, side skirt, tail fins etc Style: Black side skirts/Front Bumper/Rear Bumper valance. Some tips for the installation: 1. Clean surface where you are gonging to install, then wait and make sure the surface totally dry. Please use the including adhesion promoter on the surface of the car where you are going to install, this will help to improve the adhesiveness of the tape. Use the air blower to heat the tape on the items while installing. Because the temperature will effect the adhesiveness. Low temperature even can make it not stick at all, so it need to heat by the air blower. Please dont touch water or drive the car until more than 24 hours after the installation. Highly Recommended to have 3 or 4 Unit if you want it for the whole car. Rubber products had just leave factory will have peculiar smell which belongs to the normal situation. 1 x Car Front Bumper Lip Skirt Protector. From our stock in UK. We will post all items in the most appropriate packaging to ensure that they are not damaged on dispatch. We will response you within 48 hours and 100% promise to solve it for you. Your satisfactory is our goals! The item “100/8ft Car Front Bumper Lip Splitter Valance Chin Skirt Body Protector Trim” is in sale since Saturday, February 9, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Bumpers & Rubbing Strips”. The seller is “auto-super-mall” and is located in Glenfield, Leicestershire. This item can be shipped to United Kingdom.

• Length: 2.5 Meter / 100″
• Width: 6.5CM / 2.5″
• Warranty: 1 Year
• Attachment Method: Adhesive
• Colour: Black
• Material: Quality Rubber Foam
• Manufacturer Part Number: Does not apply
• Placement on Vehicle: Front
• Brand: Unbranded/Generic

]]> https://rangeroverp38.org/1008ft-car-front-bumper-lip-splitter-valance-chin-skirt-body-protector-trim/feed/ 0 https://rangeroverp38.org/2-5m-black-car-front-bumper-spoiler-lip-kit-splitter-valance-chin-protector-kits/ https://rangeroverp38.org/2-5m-black-car-front-bumper-spoiler-lip-kit-splitter-valance-chin-protector-kits/#comments Fri, 06 Dec 2019 10:04:19 +0000 http://rangeroverp38.org/2-5m-black-car-front-bumper-spoiler-lip-kit-splitter-valance-chin-protector-kits/ Read more >]]>








Car Auto Front Bumper Quick Lip Splitter Body Spoiler Skirt Protector All Sides. Fitment: For Universal fitment: for most cars, trucks, SUVs. Material: High quality black rubber foam. Style: 1x Black lip valance(3M tape attached, just peel and apply). Size: 6.5cm(width) x 250cm(length). Flexible and lightweight foam rubber install in minutes using ultra strong 3M automotive tale(PRE-APPLIED). Gives your ride a more aggressive and customized look. Professional installation is highly recommend. No special too, no drilling or screws required. High performance JDM racing style. Flexible enough to conform to different types of bumper/car body. Protect your car from scratches/bump and any undesired damage caused by a collision. Instruction of installation is not included. Clean the underside of the bumper with rubbing alcohol on the location the lip will be attached. This will ensure a strong bond with the bumper. Peel the backing off of one end of the lip. Position the tape so that the lip is protruding towards you. Install on the underside of the bumper starting at one end of the bumper. Make sure to press firmly. Continue to peel and attached to the rest of the bumper making sure the lip is even as you do. Cut off the excess with scissors. NOTE: If you need a stronger, more permanent attachment, you amy use self-taping screws to secure the lip to the bumper. Handle Time: PDT 01:00 / GMT 09:00. In One Day (Excluded Sunday & Holiday). Customer Services & Feedback. Customer Services Time (Excluded Holiday). 00:00-04:00 20:00-00:00. 00:00-01:00 17:00-00:00. Solve any problems with you in friendly way after communication. Well-Packed protects your items with suitable material so as to avoid damage during transit. ECheque will be held until cleared. The item “2.5m Black Car Front Bumper Spoiler Lip Kit Splitter Valance Chin Protector Kits” is in sale since Monday, January 18, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Bumpers & Rubbing Strips”. The seller is “goodserviceliu” and is located in CN. This item can be shipped worldwide.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply
• Colour: Black
• Material: rubber
• Placement on Vehicle: Front
• Reference OE//OEM Number: Sun & waterproof

]]> https://rangeroverp38.org/2-5m-black-car-front-bumper-spoiler-lip-kit-splitter-valance-chin-protector-kits/feed/ 0 https://rangeroverp38.org/carbon-fiber-front-bumper-splitter-fins-spoiler-canards-valance-chin-for-acura/ https://rangeroverp38.org/carbon-fiber-front-bumper-splitter-fins-spoiler-canards-valance-chin-for-acura/#comments Tue, 11 Jun 2019 02:29:42 +0000 http://rangeroverp38.org/carbon-fiber-front-bumper-splitter-fins-spoiler-canards-valance-chin-for-acura/ Read more >]]>








4x Real Universal Carbon Fiber Front Bumper Splitter Fins Body Spoiler Canards Valance Chin. Description Specifications: Fitment: for most cars, trucks, SUVs Material: High quality Real Carbon Fiber Package: 4pcs (2Wide+2Nrrrow)Carbon Fiber Front Bumper Canard Size:pls check the picture showed. Never Fade, Never Rust Quick and easy way to add a Body side Wing spoiler/lip to virtually any. Car for an aggressive sporty look Made with real Genuine Carbon Fiber Easy to install. Included double side tape at the back side. The installation method: 1. Pls use alcohol or agent to clean the position of the installation. To make sure it without the grease. Wax or dust etc. Pls ensure the position of installation can be completely fit the. Rive the strong double-sided adhesive of the back, if meet the case of. A relatively low temperature, please heating it via the hair dryer or. According to the comparison stick up it and press about 1-2 minutes. Note:do not wash your car in 24hours, the adhesive should be fixed. After 12 hours 5. The installation have been completed , DIY installation. All items will be checked before packing. All items are new and of high quality. All sales are final. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “Carbon Fiber Front Bumper Splitter Fins Spoiler Canards Valance Chin for Acura” is in sale since Tuesday, January 3, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “goodserviceliu” and is located in CN. This item can be shipped worldwide.

• Placement on Vehicle: Front
• Manufacturer Part Number: Does Not Apply
• Brand: Unbranded
• Classic Car Part: Yes
• Material: High quality Real Carbon Fiber
• Color:: Black Carbon Fiber
• Size: 4pcs (2Wide+2Nrrrow)Carbon Fiber

]]> https://rangeroverp38.org/carbon-fiber-front-bumper-splitter-fins-spoiler-canards-valance-chin-for-acura/feed/ 0 https://rangeroverp38.org/real-carbon-fiber-front-bumper-splitter-fins-body-spoiler-canards-valance-chin/ https://rangeroverp38.org/real-carbon-fiber-front-bumper-splitter-fins-body-spoiler-canards-valance-chin/#comments Fri, 14 Dec 2018 21:07:52 +0000 http://rangeroverp38.org/real-carbon-fiber-front-bumper-splitter-fins-body-spoiler-canards-valance-chin/ Read more >]]>











4x Real Universal Carbon Fiber Front Bumper Splitter Fins Body Spoiler Canards Valance Chin. Description Specifications: Fitment: for most cars, trucks, SUVs Material: High quality Real Carbon Fiber Package: 4pcs Carbon Fiber Front Bumper Canard Size: 4pcs is the same size, pls check the picture showed. Never Fade, Never Rust Quick and easy way to add a Body side Wing spoiler/lip to virtually any. Car for an aggressive sporty look Made with real Genuine Carbon Fiber Easy to install. Included double side tape at the back side. The installation method: 1. Pls use alcohol or agent to clean the position of the installation. To make sure it without the grease. Wax or dust etc. Pls ensure the position of installation can be completely fit the. Rive the strong double-sided adhesive of the back, if meet the case of. A relatively low temperature, please heating it via the hair dryer or. According to the comparison stick up it and press about 1-2 minutes. Note:do not wash your car in 24hours, the adhesive should be fixed. After 12 hours 5. The installation have been completed , DIY installation. All items will be checked before packing. All items are new and of high quality. All sales are final. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “Real Carbon Fiber Front Bumper Splitter Fins Body Spoiler Canards Valance Chin” is in sale since Wednesday, December 21, 2016. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Body & Exterior Styling\Bumpers”. The seller is “tiantianseller” and is located in CN. This item can be shipped worldwide.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply
• Material: High quality Real Carbon Fiber
• Colour: Black
• Unit Quantity: 4pcs
• Classic Car Part: Yes
• Placement on Vehicle: Front

]]> https://rangeroverp38.org/real-carbon-fiber-front-bumper-splitter-fins-body-spoiler-canards-valance-chin/feed/ 0 https://rangeroverp38.org/4xreal-carbon-fiber-front-bumper-splitter-fins-body-spoiler-canards-valance-chin/ https://rangeroverp38.org/4xreal-carbon-fiber-front-bumper-splitter-fins-body-spoiler-canards-valance-chin/#comments Fri, 04 Aug 2017 19:33:17 +0000 http://rangeroverp38.org/4xreal-carbon-fiber-front-bumper-splitter-fins-body-spoiler-canards-valance-chin/ Read more >]]>










4x Real Universal Carbon Fiber Front Bumper Splitter Fins Body Spoiler Canards Valance Chin. Description Specifications: Fitment: for most cars, trucks, SUVs Material: High quality Real Carbon Fiber Package: 4pcs Carbon Fiber Front Bumper Canard Size: 4pcs is the same size, pls check the picture showed. Never Fade, Never Rust Quick and easy way to add a Body side Wing spoiler/lip to virtually any. Car for an aggressive sporty look Made with real Genuine Carbon Fiber Easy to install. Included double side tape at the back side. The installation method: 1. Pls use alcohol or agent to clean the position of the installation. To make sure it without the grease. Wax or dust etc. Pls ensure the position of installation can be completely fit the. Rive the strong double-sided adhesive of the back, if meet the case of. A relatively low temperature, please heating it via the hair dryer or. According to the comparison stick up it and press about 1-2 minutes. Note:do not wash your car in 24hours, the adhesive should be fixed. After 12 hours 5. The installation have been completed , DIY installation. All items will be checked before packing. All items are new and of high quality. All sales are final. Feedback & Customer Services. We will reply you within 24- 48 hours. The item “4XReal Carbon Fiber Front Bumper Splitter Fins Body Spoiler Canards Valance Chin” is in sale since Wednesday, December 21, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exterior & Body Parts\Other External/Body Parts”. The seller is “goodserviceliu” and is located in CN. This item can be shipped worldwide.

• Placement on Vehicle: Front
• Manufacturer Part Number: Universal for Auto Car SUV Pickup Offroad
• Brand: UU-Auto Parts
• Classic Car Part: Yes
• Reference OE/OEM Number: for most cars,trucks,SUVs
• Material: High quality Real Carbon Fiber
• Color:: Black Carbon Fiber
• Other Part Number: 100% Waterproof. Never Fade, Never Rust
• Size: 4pcs is the same size,pls check the picture showed

]]> https://rangeroverp38.org/4xreal-carbon-fiber-front-bumper-splitter-fins-body-spoiler-canards-valance-chin/feed/ 0